Sonam's Esthetic Touch

Colorescience Sunforgettable® Total Protection® Brush-On Shield Glow SPF 50, 0.15 oz.

Brush-on Total Protection® and a soft, pearlescent glow. Boost your complexion with all-over luminosity or highlight high points while protecting and nourishing skin.

Plans and pricing

Standard

Contact us for a quote.

About Colorescience Sunforgettable® Total Protection® Brush-On Shield Glow SPF 50, 0.15 oz.

Currently out of stock. Contact us to order or to ask about restock timing.

Brush-on Total Protection® and a soft, pearlescent glow. Boost your complexion with all-over luminosity or highlight high points while protecting and nourishing skin.

Powered by exclusive EnviroScreen® Technology, Colorescience Sunforgettable® brushes provide protection from environmental aggressors such as UVA/UVB, pollution, blue light, and infrared radiation. Patented ingredients and an antioxidant-rich mineral powder protect against free radicals that contribute to skin damage while hyaluronic acid hydrates for supple skin. Environmental protection and a healthy lit-from-within-glow on-the-go.

Directions

Apply generously and evenly in circular motions prior to sun and environmental exposure. Wear alone all over for a subtle to buildable glow and full protection.

Or use as a highlighter by applying to high points of the face. In this case, ensure full SPF protection by using another Total Protection™ product applied all over first.

  1. OPEN: Remove brush cap, pull back the sleeve, and remove and discard the rubber band. Put cap back on.

  2. ACTIVATE: With the cap still on, hold the brush with cap facing down and tap 3-5 times on a hard surface. Put some power behind those taps! Then remove the cap and run your finger through the bristles to ensure powder is flowing. Repeat tapping if needed, until you see a small puff of powder in the air when running your finger through the bristles.

  3. APPLY: Using small circular motions, sweep directly onto dry bare skin, moisturized skin, or over makeup. Apply generously across your face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application. If applying directly over a moisturizer, primer or liquid foundation, ensure products have fully set before applying Sunforgettable®. Reapply at least every two hours for continued protection.

What is the difference between the Glow and the Bronze?

The Brush-On Shield Glow will provide you with a soft, pearlescent glow and luminosity that will allow you to achieve a lit-from-within look. The Brush-On Shield Bronze will give you a natural sun-kissed bronze and all-over warmth to give your look a bronzed radiance on-the-go.

Are Sunforgettable® Brushes suitable for dry or aging skin?

Our Sunforgettable® Brushes contain sodium hyaluronate (HA), a powerful humectant naturally occurring in plants and the human body which helps to restore and reinforce moisture in the skin and defend against the signs of aging. We love how unique it is for a loose powder formula to have moisturizing benefits in addition to the SPF protection! For dry or mature skin craving even more hydration, we recommend applying over your favorite moisturizer or one of our other liquid SPF facial products and finishing with our Hydrating Mist to deliver and lock in moisture throughout the day. This will also help provide a dewy, healthy glow for these drier skin types.

Should I apply these before or after my makeup routine?

These products can be applied after your makeup routine, or in place of the makeup products used to highlight or contour, as they are designed to enhance skin for a complete look with unmatched sun and environmental protection. If you choose to use them to highlight and/or contour, be sure to layer with another Total Protection™ product applied full-face to achieve a customized and fully protected look.

How do the Total Protection™ Brush-on Shield Glow and Bronze compare to the Total Protection™ Face Shield Glow and Bronze?

Face Shields Glow and Bronze SPF 50 are liquid formulations. These offer more intense radiance without the shimmer , and leave skin with a dewy finish. The Brush-on Shields SPF 50 in Glow and Bronze are powder formulations which offer a convenient, on-the go application of both SPF and the radiance. While you may notice shimmer particles in the Brush-on Shields, these provide a more subtle, buildable luminosity than their Face Shield counterparts and leave a silky finish.

I used to use the old Sunforgettable SPF 30 Shimmer Brushes. How do the Total Protection™ Brush-on Shield Glow and Bronze compare to those?

The discontinued Sunforgettable® SPF 30 Shimmer brushes were shimmer options of each of the 4 shades that were offered (Fair, Medium, Tan, Deep). The new Total Protection™ Brush-on Shield SPF 50 Luminizers – Glow and Bronze – are not specific to a shade or skin tone. These Luminizers provide a luminous sheen with more subtle shimmer than the previous brushes. Each Luminizer can be worn alone for a lit-from within-glow or sun-kissed radiance paired with your shade of our Total Protection™ Brush-On Shield SPF 50 for a complete and protected look.

What is the difference between UVA and UVB damage?

UVB exposure causes redness or burning, while UVA exposure causes skin darkening/pigmentation. Protection from both UVA and UVB means this product provides Broad Spectrum protection. Total Protection™ Brush-On Shield SPF 50 (all shades, Glow, and Bronze) provides Broad Spectrum SPF 50 (UVB protection) and PA++++ (UVA protection). Total Protection™ Sheer Matte SPF 30 Sunscreen Brush provides Broad Spectrum SPF 30 (UVB protection) and PA+++ (UVA protection). Total Protection™ Sport Stick SPF 50 provides Broad Spectrum SPF 50 (UVB protection) and PA++++ (UVA protection). All Total Protection™ Face Shields SPF 50 in Classic, Matte, Flex, Glow, and Bronze provide Broad Spectrum SPF 50 (UVB protection) and PA++++ (UVA protection). Total Protection™ Body Shields SPF 50 in Classic and Bronze provide Broad Spectrum SPF 50 (UVB protection) and PA++++ (UVA protection). Total Protection™ Color Balms SPF 50 in Blush, Berry, and Bronze provide Broad Spectrum SPF 50 (UVB protection) and PA++++ (UVA protection).

What makes this new formulation different from the previous?

While both formulations provide SPF protection from UVA/UVB, the Total Protection™ Brush-On Shield Bronze SPF 50 was reformulated with proprietary EnviroScreen® Technology to go beyond SPF protection.

What does the PA rating mean?

The PA rating system measures the level of protection from UVA rays, which are known to cause pigment darkening in the skin. It measures the amount of time a product would protect your skin from darkening.

The following shows how much protection each PA score provides compared to unprotected skin. If your unprotected skin normally darkens/pigments after 5 min of UVA exposure:

PA RatingLevel of Protection# of minutes protected before experiencing skin darkening/pigmentationPA+2-4 times10-20 minutesPA++4-8 times20-40 minutesPA+++8-16 times40-80 minutesPA++++>16 times>80 minutes

All Total Protection™ Face Shields SPF 50 have a PA++++ rating, the highest level of protection from UVA exposure. All Total Protection™ Brush-On Shields SPF 50 have a PA++++ rating, the highest level of protection from UVA exposure.

Why is the % of actives lower in this brush formula compared to the previous one?

The Total Protection™ Brush-On Shield Glow SPF 50 was reformulated with new, proprietary EnviroScreen® Technology. This technology uses patented zinc oxide and titanium dioxide that make them more efficient as sunscreen actives than standard zinc oxide and titanium dioxide.

This formulation contains 22.5% Zinc oxide and 22.5% titanium dioxide, for a total of 45% of active ingredients. This is the highest percent of actives among leading brush-on sunscreens on the market.

Finally, Colorescience Sunforgettable™ brushes are the only powder sunscreen brushes recommended by the Skin Cancer Foundation. Total Protection™ Brush-On Shield SPF 50 has earned the Skin Cancer Foundation Active use seal.

What is the antimicrobial ingredient?

Our brush is coated with a proprietary wash comprised of surfactants and a well-known non-toxic, and paraben-free preservative that has been shown to inhibit the growth of bacteria and fungus to keep the brush fresh.

What is EnviroScreen® Technology?

EnviroScreen® Technology is proprietary to Colorescience®. EnviroScreen® Technology uses patented active ingredients, Zinc Oxide and Titanium Dioxide, that create a barrier preventing free radical formation and oxidative stress. These patented actives are combined with specialty ingredients that, together, work synergistically to protect skin from damage caused by exposure to UVA/UVB rays, pollution, blue light (also known as High Energy Visible, or HEV, light), and infrared radiation.

Can you explain how adherence/water- and sweat- resistance is tested?

Colorescience® follows the FDA guidelines for testing water resistance or adherence to the skin after exposure to water. A panel of 10 people apply the product to their skin prior to being immersed in a whirlpool (of moving or circulating water) for 20-minute cycles. After 20 minutes in the whirlpool, panelists exit the whirlpool before immersing themselves again. For 40 minutes water resistance, panelists are immersed in the water for two 20-minute cycles. For 80 minutes water resistance, this is done a total of 4 times. After all cycles are completed, the SPF that is remaining on the skin is measured. If after 80 minutes in the whirlpool, the SPF remaining is at least 50, the result is an SPF 50 with 80 minutes of water resistance.

When I hold the new brush up next to the existing formula it appears lighter, why is that?

Your eyes are not playing tricks on you; the new formulation does look lighter in the brush component in comparison to the existing brush in Medium, Tan and Deep. However, when you apply on skin you will see that there is no visible difference in how the color wears on the skin.

What is the reasoning for why the colors appear visibly lighter in the brush component?

This is a result of our new technology in which our zinc oxide and titanium dioxide are encapsulated, and how they interact with the iron oxides and our skin. While slightly lighter looking in the brush component, when applied to skin the colors wear the same.

How do you measure pollution protection?

We measure our pollution protection by directly measuring free radicals created from UV + pollution events on unprotected skin and skin protected with Sunforgettable® Total Protection™ Brush-on Shield Bronze SPF 50 and Sunforgettable® Total Protection™ Face Shield SPF 50. We use a testing technique called electron spin resonance (ESR) that uses a combination of a magnetic field and electron magnetic waves to directly detect the unpaired electrons of free radicals.

How do I activate/prime my brush?

In order to ensure the product is dispensing properly, be sure to activate the brush prior to application. Remove the cap and push the plastic sleeve down. Remove and discard the rubberband and pull the sleeve back up. Put the cap back on. Tap firmly several times on a hard surface with the cap side down. Open and pull down the sleeve again and flick the bristles to ensure powder is flowing, and apply using light pressure in small circ…

More